For all your Collision/Quality Paints/Refinish Needs! Our website Is constantly being updated, If you do not see an item on the site. Please contact Collision 360 Email: [email protected]
POR-15 Fuel Tank Sealer was formulated and developed in our own laboratories due to the demand for a high-tech sealer impervious to all fuels. Get yours now!
The rating of this product is 0 out of 5
(0)
In stock
POR-15 FUEL TANK SEALER
POR-15 Fuel Tank Sealer was formulated and developed in our own laboratories due to the demand for a high-tech sealer impervious to all fuels, including the new Stage II fuels which have a high alcohol content. This gas tank sealant has superior strength and fuel resistance. Also, this gas tank liner stops rust, corrosion, and fuel leaks.
Formerly U.S. Standard Fuel Tank Sealer
STEP-BY-STEP RESTORATION
Before: This fuel tank had small pinhole leaks on the end near the seam. If the tank had a competitors old failed sealer, it should be removed with POR-15 Strip Gel before starting the repair process.
Step 1:Mix 1 quart Cleaner Degreaser with 1 quart of hot water. This solution will be used to remove any gum, varnish or sludge from the inside of the tank.
Step 2: Pour the entire bottle of Metal Prep to dissolve rust, coat the tank with zinc phosphate, and etch the metal for better adhesion of the sealer.
Step 3: After the tank is clean, drain the tank and rinse thoroughly with water. Let the tank dry. When totally dry, pour in the entire can of Fuel Tank Sealer.
Step 4: After all surfaces have been coated, drain the tank for about an hour to remove excess sealer from the tank.
Step 5: Once repaired, use fuel preservation & stabilizer to keep your entire fuel system in proper working order and to avoid "stale gas" problems in your future!
